Steren SEG-510 Manual De Instrucciones página 8

If the fi ngerprint recognition system fails, you have an If the fi ngerprint recognition system fails, you have an
emergency key to open the box. Remove the frontal cover and emergency key to open the box. Remove the frontal cover and
place the key, slightly turn it to the left and move the knob to the place the key, slightly turn it to the left and move the knob to the
right, door should be opened. right, door should be opened.
SYSTEM RESTARTING
This function allows you to restart the system in case the stored
fi ngerprints cannot be used.
Also, if the memory is full, use this button to add new fi ngerprints.
1.- Open the door as you normally do, if it is necessary use the
emergency key.
2.- Press and hold Restart button 10 seconds.
3.- Release it; the indicator light in green and you will hear a long beep,
it indicates that the process fi nished correctly.
When you press the restart button, all stored fi ngerprints will be When you press the restart button, all stored fi ngerprints will be
deleted and you must register them once again. deleted and you must register them once again.
ENGLISH-08