Indoor Temperature - Oregon Scientific RM329P Manual Del Usuario

2. Enter the value by [ ] or [
ALARM to confirm and go to the minute digits. Enter the value
and press ALARM to confirm.
3. The alarm is automatically activated. To deactivate it, press
ALARM once when alarm time is displayed.
ALARM AND SNOOZE FUNCTION
When the alarm is set, it will sound at the set time. The back light
will go on for five seconds with the alarm-on icon [
The crescendo function allows the alarm to sound gently and step up
its intensity in three steps. Without interruption, the alarm will
activate for a minute.
To stop the alarm, press any key. If the [ SNOOZE ] button is
pressed, the snooze function will be triggered. The alarm will stop
for eight minutes before activating again.

INDOOR TEMPERATURE

The temperature is shown in degree Celsius (°C). The RM329P is
capable of measuring temperatures within the -5°C and +50°C
range. If the temperature goes above or below that, the display will
flash.
HOW TO RESET THE UNIT
Pressing the RESET button will cause the RM329P to clear user
selected settings and return to the factory settings. Pressing the
] buttons for the hour digits. Press
] flashing.
RESET button will also reactivate the radio signal reception feature
from manual time set mode.
MAINTENANCE
When handled properly, this unit is engineered to give you years of
satisfactory service. Here are a few product care instructions:
1. Do not immerse the unit in water. If the unit comes in contact
with water, dry it immediately with a soft lint-free cloth.
2. Do not clean the unit with abrasive or corrosive materials.
Abrasive cleaning agents may scratch the plastic parts and
corrode the electronic circuit.
3. Do not subject the unit to excessive: force, shock, dust,
temperature, or humidity. Such treatment may result in
malfunction, a shorter electronic life span, damaged batteries, or
distorted parts.
4. Do not tamper with the unit's internal components. Doing so
will terminate the unit's warranty and may cause damage. The
unit contains no user-serviceable parts.
5. Only use new batteries as specified in this instruction manual.
Do not mix new and old batteries as the old batteries may leak.
Batteries contain dangerous chemicals and may explode or leak
and cause injuries if old and new batteries are used together, are
inserted improperly or are improperly disposed of. Always use
caution when using or disposing of batteries.
6. Read this instruction manual thoroughly before operating the
unit.
7