Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 20 minutes.
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors,
power drill with drill bit.
Helpful Tools (not included): Measuring tape, level
INSTALLATION INSTRUCTIONS
Note: This wall cabinet comes with two
different door handle options.
1. One set of door handles (BB) are attached to
the inside of doors (D & E) and the other set is
located with the hardware pack. Use the
attached string to open the doors initially. U
nscrew the door handles (BB) and attach your
preferred handles to the outside of the
doors (D & E), as illustrated in the diagram.
Hardware Used
Door Handle
BB
2. Locate wall bracket (B) and set aside.
Locate and mark wall stud locations where
cabinet (A) will be placed. Center wall
bracket (B) in desired level location off the
floor and mark locations where wall bracket
(B) meets the location of the wall studs.
Using hardware appropriate for your wall
type (not included), secure the wall bracket
(B) to the wall into preferably 2 wall studs. Use
hardware such as a cabinet screw or toggle bolt
depending on your wall type. Make sure the
wall bracket (B) is level and centered well to the
desired location of the cabinet (A). Be careful
not to disturb any plumbing or electrical lines that
may be concealed in the wall.
!IMPORTANT SAFTEY STEP!
It is critical to have a strong secure
connection to the wall before continuing to
the next step.
1
1
x 2
2
6
A
D
2
B
E
3
BB
1
2
Publicidad
Capítulos
Tabla de contenido
