Connecting Power - ACT iCharge Manual De Instrucciones

iCHARGE 6:
Charge up to six NiCd or NiMH batteries
conditions as it charges with no memory effect
iCHARGE 6M:
Same great benefits and optional emergency
maintenance mode keeps batteries in peak condition
iCHARGE™ Benefits
• Fastest charge available
• Extended battery life with no memory effect
• Powered by enrev technology to condition as it charges
• Microprocessor controlled
• No complicated charging rules
• Precise termination with no "top off" or trickle charge
• User-friendly: Green light = GO!
iCHARGE:
Fast, user-friendly rapid charging with deep conditioning
at the touch of a button.
SAVE THESE INSTRUCTIONS
TABLE OF CONTENTS
This manual contains important safety and operating
Preparation
instructions for your battery charger.
Safety Precautions
Connecting Adapters

Connecting Power

Before using your battery charger, read all instructions and
cautionary markings on the charger, adapter, and battery
Operation
carefully.
Charging
Reconditioning
CAUTION: To reduce the risk of injury,
Maintainor™ Feature
Light (LED) Sequence
charge only rechargeable-type batteries.
Troubleshooting Other types of batteries may burst, causing
Specifications
personal injury and damage.
Warranty
Connecting an adapter
Your iCHARGE unit has been designed with interchangeable adapters. Please identify the
correct adapter for your specific battery type.
WARNING: Charging battery types not specified on the adapter may result in personal
injury and damage.
(1) Align the adapter over the shrouded-pin connector. (see diagram)
(2) Press adapter down gently.
(3) Fasten securely, using two mounting screws provided. (see diagram)
Connecting power
Caution: To ensure safe and damage-free operation.
Always plug the AC wall plug/power connector into the iCHARGE unit BEFORE you plug it into a
•
standard AC outlet.
Always remove the AC wall plug from the outlet BEFORE you unplug it from the iCHARGE unit.
•
• Do not operate charger in temperatures exceeding 40º C (104º F).
• Do not operate if charger has been dropped or damaged, or if the cord has been damaged.
• Do not disassemble or attempt to modify unit. This action will automatically void your warranty.
(1) Verify that the iCHARGE 6/6M (models
i60/i65/i70/i75) 115V/220V switch is set to the
correct voltage (see diagram).
(2) Place charger on a clean, flat, dry surface.
Note: Charger is not suitable for outdoor use.