Trouble Shooting Chart - Koblenz AI-1230 Manual De Servicio Lista De Partes

PROBLEM
A) Motor does not run
B) Motor runs but cleaner does not
pick-up
C) Motor runs erratically
IV. TROUBLE SHOOTING CHART
POSIBLE CAUSE
1.- Not firmly pluged in.
2.- 8ad ON-OFF switch.
3.- Line cord open
4.- Motor open
1.- Dust filter bag c1osed.
2.- Hose or wand closed
3.- Motor slow
4,- Tank full
5.- Float valve up.
6.- Demaged motor base gasket or head gasket 6.- Check gaskets
1.- Worn carbon brushes.
2.- Defective armature.
1.- Check attachment plug.
2.- Replace switch.
3.- Replace cord.
4.- Check motor and wiring.
1.- Clean filter bag.
2,- Clean obstruction.
3.- Check carbon brushes.
4.- Empty tank.
5,- Check float valve.
1,- Replace carbon brushes.
2.- Replace armature.
5/18
SOLUTlON
Elaborado: Julio / 2004