Attention; Introduction; Equipment Description; Equipment Identification - Sagola 40000314 Manual De Instrucciones

Before activating the unit, you must read, take note of,
and entirely follow all the indications described in this
Manual.
You must keep the unit in a safe place and one accessi-
ble for all unit users.
The unit must be started and handled exclusively by
personnel instructed in its use and must be employed
only for the purpose for which it was designed.
The unit in your possession belongs to the family of units
used for compacting tins. Designed to solve residue
storage and disposal problems in places like bodys-
hops, industrial workshops, garages, etc.
Significant space saving and cost reduction in waste
management.
Manufactured in conformity with provisions found in the
directive 98/37/EEC and subsequent modifications.
The model is provided with the certified
Can crusher (Ref.40000314)
The "can crusher " is a compactor designed for redu-
cing tin and metal tank volume.
The press opening accommodates up to 25 L. tins
(max. height 45cm. and max. diameter 31cm).
The can crusher base, made of 4 mm sheet metal to
support the pressing impact, is the stoutest compactor
among similar products, making the can crusher
reliable and durable.
Made of aluminium, chromed, with a 500 mm. stroke
and a 160 mm. bore, the cylinder produces a pressing
power of more than 1600 Kg.
The can crusher has been designed to solve problems
of empty tin storage every time troubles of encumbran-
ce and waste disposal occur, such as in car-body
shops, workshops, garages, etc.
The metal waste-material volume reduction will allow
the end user to follow the most recent laws in matter of
waste disposal saving in transport and disposal costs at
the same time.
The equipment Can crusher and cardboard is provided
with an enrollment that informs:
- Mark
- Name and address

1. ATTENTION

2. INTRODUCTION

.

3. EQUIPMENT DESCRIPTION

4. EQUIPMENT IDENTIFICATION
- Number Enrolment
- Brand commercializing
company
Likewise, Accident Prevention Standards, Regulations,
Work Centre Directives and current legislation and
restrictions must be taken into consideration.
SAGOLA S.A.U., the SAGOLA logotypes and other
SAGOLA products mentioned in this manual are regis-
tered trademarks or brand names of the company
SAGOLA S.A.U.
It consists of the following standard features:
- Can crusher and cardboard machine.
- Instruction Manual
- Packaging
Optional and complementary unit parts:
- SAGOLA air hoses
- SAGOLA air Purifiers and/or Regulators
- SAGOLA compressed air connectors and couplings.
Can crusher and cardboard (Ref.40000315)
The "can crusher and cardbord" is a compactor desig-
ned for reducing tin, metal tank volume, paper and
cardboard.
It's designed to press paper and cardboard with a
volume of 2,100 cubic cm. and till 25 liters tins (the
inner dimensions 650x540x600 mm).
The compactor base, made of 4 mm. sheet metal to
support the pressing impact, is the stoutest compactor
among similar products, making the can crusher
reliable and durable.
Made of aluminium, chromed, with a 600 mm. stroke
and a 160 mm. bore, the cylinder produces a pressing
power of more than 1600 Kg.
The can crusher, paper and cardboard has been desig-
ned to solve problems of empty tin storage every time
troubles of encumbrance and waste disposal occur, such
as in car-body shops, workshops, garages, etc.
The metal waste-material volume reduction will allow
the end user to follow the most recent laws in matter of
waste disposal saving in transport and disposal costs at
the same time.
The manometer verifies the completion of compression.
an Elcometer company
SAGOLA S.A.U.
Tel. +34 945 214150 - Fax +34 945 214147 - email: sagola@sagola.com
S/N
- 12 -
- Urartea, 6 - 01010 VITORIA (Alava) - SPAIN
www.sagola.com