Klarstein 10029713 Manual Del Usuario página 17

3. Insert the squeezing screw into the centre of the drum (on the
spinning brush of the main body).
If installed improperly, the hopper cannot be closed.
Warning: Hazard of pinching
Never put your finger at the small gap between drum and squeezing screw.
4. Assemble the hopper onto the drum.
Hopper drum (open)
Disassembling instruction
When disassembling for cleaning, start with the reverse step when assembling.
If the squeezing screw is difficult to take out, please:
1. Take out the drum from the main body.
2. Press upward from the bottom of the drum.
17
Finished installation (closed)