Marley Get Up Stand Up Manual De Instrucciones página 2

Get Up Stand Up
Bluetooth Audio System
®
Greetings and Welcome to the House of Marley
We are honored you have selected Get Up Stand Up to become part of your music experience. Get Up
Stand Up is a portable, two-way, stereo sound system which works with Bluetooth
wirelessly and hundreds of other devices via the auxiliary input. The system uses two high-output, long-
throw 4.5" (100mm) woofers in a ported enclosure, two 1" (25mm) tweeters and a powerful amplifier.
Everything You Need to Jam
Get Up Stand Up comes with the following items:
Sound System
Powering Your Get Up Stand Up
Your Get Up Stand Up uses a universal power supply (100-240VAC) and is powered by a standard wall outlet.
1. Insert the AC power supply cord into Get Up Stand Up.
2. Insert wall plug cord connector into the power supply.
3. Insert wall plug into an appropriate wall outlet.
Connecting Your Music Device(s)
Pairing Mode (Blinking Blue LED)
Get Up Stand Up automatically goes into reconnect mode for 5 seconds as soon
as you turn it on (flashing BLUE led). It then switches to auxiliary mode (RED led).
You can pair a new device to Get Up Stand Up by holding the
Note: Holding the
Get Up Stand Up and go into Pairing Mode.
Connected Mode (Solid Blue LED)
Use your Bluetooth-enabled device to pair to Get Up Stand Up. Get Up Stand Up does not require a
pairing password. Once paired, the LED will glow solid blue.
Note: Get Up Stand Up will automatically pair with the last device connected to it when turned ON (when possible).
Connecting other devices
The auxiliary inputs on the back of Get Up Stand Up allow you to connect other audio devices to the
system. Simply connect your device(s) to either AUX 1 or AUX 2 using the 3.5mm stereo cable or
standard composite cables (not included).
EN
1
for 3 seconds will kick off the device currently connected to
AUX
Remote AC Power Supply
(100-240 VAC)
2
for 3 seconds.
1
devices connected
®
Power Cord for
Wall Outlet
3.5mm Stereo
Mini Cable
3