Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

BATHROOM FAUCET
H03L-421-CH – Polished chrome finish with pop-up
H03L-421-BN – Brushed nickel finish with pop-up
H03L-421-ORB – Oil rubbed bronze finish with pop-up
PACKAGE AND HARDWARE CONTENTS
PART
DESCRIPTION
A
Faucet assembly
B
Pop-up assembly
C
Mounting nut
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
• Protect your eyes with safety glasses when cutting or soldering water supply
lines.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents. If any part is missing or
damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Adjustable Wrench, thread sealant
tape, Silicone
Need Help? Please call our toll-free line at (877) 319-3757 (8 am to 5 pm CST) for additional assistance or service.
Homewerks Worldwide, LLC • Lake Bluff, IL 60044 • www.homewerksww.com
QUANTITY
1
1
A
2
CAUTION
• If you solder the joints during installation, the seats, cartridges, and washers
must be removed before using a flame or the warranty will be voided on
these parts.
• Cover the drain to avoid losing parts.
Installations may vary depending on how the previous faucet was
installed. Supplies necessary for the installation of the faucet are not
all included; however, they are available wherever plumbing supplies
are sold.
Prior to beginning installation, turn off the hot and cold water lines, then turn
on the old faucet to release built-up pressure. When installing the new faucet,
hand tighten the connector nuts. DO NOT OVERTIGHTEN. Connections
that are too tight will reduce the integrity of the system.
C
NSF-61
ADA
B
04-05-2018

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Home2O H03L-421-CH

  • Página 1 BATHROOM FAUCET H03L-421-CH – Polished chrome finish with pop-up H03L-421-BN – Brushed nickel finish with pop-up H03L-421-ORB – Oil rubbed bronze finish with pop-up NSF-61 PACKAGE AND HARDWARE CONTENTS PART DESCRIPTION QUANTITY Faucet assembly Pop-up assembly Mounting nut SAFETY INFORMATION...
  • Página 2: Product Specifications

    PRODUCT SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Max. Flow Rate: 1.2 GPM (4.54 LPM) at 60 PSI Ceramic cartridges ASME A112.18.1/CSA B125 Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces NSF 61-9 Polished chrome, brushed nickel or oil rubbed bronze finish Weight: 3.743 lbs.
  • Página 3: Checking For Leaks

    ASSEMBLY INSTRUCTIONS Checking for Leaks: Remove the aerator (1) from the faucet body (2). Turn on the water supply. Turn the handles (3) and allow both hot and cold water to run for at least one minuet each. While the water is running, check for leaks.
  • Página 4: Replacement Parts

    For replacement parts, call our customer service department at (877) 319-3757, 8 a.m. - 5 p.m., CST, Monday - Friday. PART DESCRIPTION PART # PART # PART # H03L-421-BN H03L-421-ORB H03L-421-CH RP03025CH RP03025BN RP03025ORB Aerator assembly RP03204CH RP03204BN RP03204ORB Handle assembly...
  • Página 5: Grifo Para Baño

    GRIFO PARA BAÑO H03L-421-CH – Acabado de cromo pulido con pop-up H03L-421-BN – Acabado niquel pulido con pop-up H03L-421-ORB – Acabado bronce frotado con aceite con pop-up NSF-61 PAQUETE DE HARDWARE Y CONTENIDO CANTIDAD PARTE DESCRIPCIÓN Montaje de grifería Ensamblaje emergente Tuerca de montaje INFORMACIÓN SOBRE LA SEGURIDAD...
  • Página 6: Especificaciones Del Producto

    ESPECIFICACIONES DEL PRODUCTO ESPECIFICACIONES ESPECIFICACIONES Caudal de flujo máximo: 4,54 LPM (1,2 GPM) a 60 PSI Cartuchos de cerámica ASME A112.18.1/CSA B125 Fabricado a incluir no más de 0,25% de contenido de plomo promedio ponderado en superficies mojadas NSF 61-9 Cromo pulido, níquel cepillado y acabado en bronce aceitado Peso: 3.743 libras INSTRUCCIONES DE MONTAJE...
  • Página 7: Solución De Problemas

    INSTRUCCIONES DE MONTAJE Comprobación de Fugas: Retire el aireador (1) del cuerpo del grifo (2). Encienda el suministro de agua. Gire las manijas (3) y permita que el agua caliente y fría corran durante al menos un minuto cada una. Mientras el agua está en funcionamiento, verifique si hay fugas.
  • Página 8: Lista De Repuestos

    LISTA DE REPUESTOS Para piezas de repuesto, llame a nuestro departamento de servicio al cliente al (877) 319-3757, 8 a.m.-5 p.m. CST, Lunes - Viernes. PARTE DESCRIPCIÓN PARTE# PARTE# PARTE# H03L-421-CH H03L-421-BN H03L-421-ORB RP03025CH RP03025BN RP03025ORB Ensamblaje del aireador RP03204CH...

Tabla de contenido