ASROCK X79 Extreme4-M Manual De Instrucciones página 18

TM
2.5 SLI and Quad SLI
This motherboard supports NVIDIA
technology that allows you to install up to two identical PCI Express x16 graphics
cards. Currently, NVIDIA
TM TM
Vista / Vista
® TM
Windows Vista
procedures in this section.
Requirements
1. For SLI
2. Make sure that your graphics card driver supports NVIDIA
3. Make sure that your power supply unit (PSU) can provide at least the
2.5.1 Graphics Card Setup
2.5.1.1 Installing Two SLI
Step 1. Install the identical SLI
because different types of graphics cards will not work together properly.
(Even the GPU chips version should be the same.) Insert one graphics
card into the PCIE1 slot and the other graphics card into the PCIE3 slot.
Make sure that the cards are properly seated on the slots.
Step2. If required, connect the auxiliary power source to the PCI Express
graphics cards.
18
TM
Operation Guide
®
SLI
® TM
SLI technology supports Windows
64-bit / 7 / 7 64-bit OS. NVIDIA
TM
/ Vista 64-bit / 7 / 7 64-bit OS only. Please follow the installation
TM
technology, you should have two identical SLI
®
cards that are NVIDIA certified. For Quad SLI
have two identical Quad SLI
certified.
technology (driver version 280.41 and later). Download the driver from
®
NVIDIA website (www.nvidia.com).
minimum power required by your system. It is recommended to use
®
NVIDIA certified PSU. Please refer to NVIDIA
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
ASRock X79 Extreme4-M Motherboard
TM TM
and Quad SLI (Scalable Link Interface)
® TM
Quad SLI
TM
technology, you should
TM
-ready graphics cards that are NVIDIA
®
website for details.
®
XP / XP 64-bit /
technology supports
TM
-ready graphics
®
® TM
SLI
®
certified