Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
If the ate does not stay closed, verify that the mark in the le upper corner of the ate is ali ned with the mark on the
upper lockin housin as shown in Fi ure 12C.
If the mark on the le upper corner does not
adjustments below to ensure that the door panel can be auto closed.
If the upper lockin housin is o set toward the
then adjust the door panel and upper lockin housin un the two marks are ali ned (12C). Make certain to re hten the
screw (12D).
Figure12A
upper locking
left upper corner
housing
12C
If the upper lockin housin is mis
hin e (12G), then press the door panel and the door lower hin e to ether (12H) un the two marks on the le corner are
ned. Make sure the screw is re htened.
upper locking
12E
housing
Care
CLEANING
Clean the Superyard usin
solvents or chemicals to clean the Superyard.
n with the mark on the upper lockin housin please make the
ht (12A) or le
12B
door
left upper corner
panel
12D
ned upward (12E) or downward (12F), please loosen the screw on the door lower
12F
upper locking
housing
water and a mild de
Distributed exclusively in the United States by
North States Industries, Inc.
5455 Hi hway 169 N
Plymouth, MN 55442
www.northstatesind.com
Manufactured in China
1 (
B 2
, )
l p
a e
e s
o l
s o
upper locking
door
housing
panel
12G
door lower
hinge
ent. Use a so cloth or spon e to avoid scratches. Never use
n e
t
e h
c s
e r
w
o
n
upper lockin housin ,
Note Please use two
screwdrivers when
tenin
or loosenin the screws (12D).
12H
Publicidad
Tabla de contenido
