Care And Maintenance; General Points; Cleaning The Covers - i'coo platon duo Instrucciones Para El Uso

CARE AND MAINTENANCE

CARE AND MAINTENANCE

GENERAL POINTS

GENERAL POINTS
Please check the proper functioning of the push-
chair regularly. Ensure that the frame is stable,
that the screws and bolts are secure, that latches
and catches are properly locked, that the wheels
are fixed and that the brakes are in good working
order. From time to time, check the strength of
the textile cover seams and that plastic parts are
in good condition. It is essential that defective or
worn parts are replaced immediately. The same
applies to components which are broken, torn,
defective or worn. Please replace these only with
original i'coo spare parts.
Do not expose the push-chair to excessive
sunshine as this can cause the textiles covers and
plastic parts to fade.

CLEANING THE COVERS

CLEANING THE COVERS
Remove the cover from the frame by undoing
the straps, knobs or screws. Before washing the
cover, please read the washing instructions given
on the sewn-in label.
Clean the cover by solely wiping it down
evenly with a damp cloth. If textile covers have
inserts which cannot be removed, ensure that
this process does not soak the part through
completely. Providing there are no plastic,
wooden or metal parts attached to or inside the
cover, it can be washed in a washing machine at
30° and spin-dried at medium speed.
Allow the cover dry in the open air, although not
in intense sunshine.
In order to prevent shrinkage, please do not dry
the cover in a heat-tumble drier
Do not re-install covers until they are completely
dry.
GB GB
14 14