Inserting A Pause In The Dialing Sequence (Of A Stored Number); Reviewing Records Stored In Memory; Changing Records Stored In Memory; Deleting Records Stored In Memory - RCA 23200 Manual De Instrucciones

Inserting a Pause in the Dialing Sequence (of a Stored Number)

Press the #pause button on the handset's touch-tone pad to insert a delay in dialing sequence when
a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait
for a computer access tone). Each pause counts as one digit in the dialing sequence.

Reviewing Records Stored in Memory

1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the memory key to display SELECT MEMORY 01-50.
3. Press the CID/vol or buttons to scroll the records, or use the handset's touch-tone pad to
enter the memory location number.

Changing Records Stored in Memory

Follow the procedure for Storing Names and Numbers in Memory, except replace a stored telephone
number with a new one.

Deleting Records Stored in Memory

1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the memory key to display SELECT MEMORY 01-50.
3. Press the CID/vol or buttons to scroll to the record you want to delete or use the touch-tone
pad to enter the desired memory location.
4. Press the delete button to mark the record for deletion. The display shows DELETE?
5. Press the delete button to delete the record. DELETED shows in the display.
NOTE: If you don't want to change or delete a record, simply press the flash/exit button, or wait
for one minute to exit the review mode automatically.

Dialing a Number from Memory

1. Make sure the phone is ON (in talk mode) by pressing the home button.
2. Press the memory key to display memo # - -.
3. Use the touch tone pad to enter the memory location number. The number dials automatically.
-OR-
1. Make sure the cordless handset is OFF (not in talk mode).
All manuals and user guides at all-guides.com
Memory
33