Docking Station; Handset Sound Signals - RCA 23200 Manual De Instrucciones

Docking Station Messages

DOCKING STATION

SEARCHING...
REGISTERING...
RESET 1YES >2NO
UNABLE TO REG!

Handset Sound Signals

Signal
A long warbling tone (with ringer on)
Three short beeps
One short beep (every 7 seconds)
All manuals and user guides at all-guides.com
Indicates that the docking station has registered to the base
successfully and that there is no cell phone connected to the docking
station.
Displays during the initial power up of the docking station.
Indicates that the cell phone connected via the adaptor cable to the
docking station has started the auto-registration process.
Prompt asking if you want to reset the docking station's timer.
Selecting Yes resets the accumulated talking time (the default is No).
Connecting a different model of cell phone to the docking station
automatically resets the timer.
Indicates the auto-registration failed.
Troubleshooting
Meaning
Signals an incoming call
Page signal
Low battery warning
41