Basic Information; Deleting A Cid Record; Deleting All Cid Records; Changing The Battery - RCA 23200 Manual De Instrucciones

3. If the number does not dial as shown, press the format/conference button. Repeat if necessary,
until the correct number of digits show in the display.
4. Press the home button or cell button on the handset. The number dials automatically.
NOTE: If the telephone number is corrupted, such as an alphabetical character in a number field,
you will hear an error tone and the number is not dialed. Unit displays "UNABLE TO DIAL".

Deleting a CID Record

1. Make sure the cordless handset is OFF (not in talk mode).
2. Use the CID/vol or buttons to display the CID record you want to delete.
3. Press the delete button. The display shows DELETE CALL ID?
4. Press the delete button to erase the record showing in the display. The display shows DELETED.
NOTE: Press the flash/exit key to return to the standby mode.

Deleting All CID Records

1. Make sure the cordless handset is OFF (not in talk mode).
2. Use the CID/vol or buttons to scroll to any CID record.
3. Press and hold the delete button until DELETE ALL? shows in the display.
4. Press delete button to erase all of the current CID records. The display shows DELETED followed
by NO CALLS.
NOTE: Press the flash/exit key on the handset to return to the standby mode.

Changing the Battery

CAUTION: To reduce the risk of fire or personal injury, use only
the battery 5-2670 that is compatible with this unit.
1. Make sure the telephone is OFF (not in talk mode) before you
replace battery.
2. Remove the battery compartment cover.
3. Disconnect the cord attached to the battery pack from the jack
inside the battery compartment and remove the battery pack
from the handset.
4. Insert the new battery pack and reconnect the battery plug.
5. Put the battery compartment cover back on.
6. Place handset in the base or handset charge cradle to charge.
All manuals and user guides at all-guides.com

Basic Information

Battery
compartment
Battery
pack plug
37