Publicidad
Idiomas disponibles
Idiomas disponibles
STARTING YOUR
DIGITAL SPACE SAVER
9
Plug in your unit and press the power
10
A
A
button power-of .
11
A
10
Set your desired fan speed by pressing
9
A
A
the fan button
three fan speeds that are displayed by F1 (the lowest
speed) through F3 (the highest speed).
Note: On higher speeds, the Space Saver puts out a tremendous amount
of humidity, so it's louder on these levels. Most of our customers liken it to
the sound of a box fan. Rest assured there is nothing wrong with your unit,
it's just working very hard to put out much-needed humidity.
11
Press the humidity control button
A
to set your humidity level from 25% to
65%. The humidistat on your cord will read your
home's humidity and turn your fan off when the
set level is reached. When set to 65%, your unit
will run continuously.
831000
. Your Space Saver has
STARTING YOUR
ANALOG SPACE SAVER
10
B
9
Plug in your unit and press the
9
B
B
power knob.
11
10
B
Set your desired fan speed by turning
B
the power knob. Your Space Saver has
three fan speeds that are displayed by F1 (the
lowest speed) through F3 (the highest speed).
Note: On higher speeds, the Space Saver puts out a tremendous
amount of humidity, so it's louder on these levels. Most of our customers
liken it to the sound of a box fan. Rest assured there is nothing wrong with
your unit, it's just working very hard to put out much-needed humidity.
11
Turn the humidity control knob to set
B
your humidity level from 25% to 65%.
The humidistat on your cord will read your
home's humidity and turn your fan off when
the set level is reached. When set to 65%, your
unit will run continuously.
That's it! Your Space Saver is ready to use.
836000HB
8
Publicidad
