Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
16 pcs - H6 Allen Head Bolt
16 pcs - H7 Flat Washer
STEP 3:
Install P9 Wooden Ball Catchers using H5 Screws as shown in FIGURE 3.
Tighten, but do not strip out H5 Screws.
Install P4A Left Legs and P4B Right Legs with P5 Leg Cross Tubes using H6 Allen Head Bolts with H7 Flat Washers
as shown in FIGURE 3. Use A3 Allen Wrench to tighten all H6 Bolts.
IMPORTANT NOTE:
Install P5 Leg Cross Tubes
before tightening H6 Leg Bolts.
H7
H6
All Rights Reserved.
© 2019 Escalade Sports
PARTS REQUIRED:
8 pcs - H5 Phillips Round Head Screw 2 pcs - P4A Left Leg
2 pcs - P9 Wooden Ball Catcher
FIGURE 3
P4B
P5
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND
2 pcs - P4B Right Leg
2 pcs - P5 Leg Cross Tube
1 pc - A3 4mm Allen Wrench
P4A
H5
H5
H7
SET IT ON ITS LEGS.
7
P4A
P5
P9
H6
For Customer Service Call 1-888-996-2729
P4B
Publicidad
Tabla de contenido
