American Legend FT200 Manual Del Usuario página 9

1 pc - C1 5 Player Rod
2 pcs - C2 3 Player Rod
1 pc - C3 2 Player Rod
8 pcs - C4 Rod Bumper
STEP 6:
Slide C1 5 Player Rod, C2 3 Player Rods and C3 2 Player
Rod through Rod Bushings of one P1 Side Apron as
shown in FIGURE 6.
IMPORTANT NOTE: Please note the location
of the hole that is near one end of each rod.
This is the handle end of the rod.
Place one C5 Rod Washer, C4 Rod Bumper and
one C5 Rod Washer on each rod as shown in
FIGURE 6.
Place C9 Red Shirt / White Short Players (
C10 One Player Rod Stop (
FIGURE 6.
IMPORTANT NOTE: The goalie should be at your
left and your team (player face) facing to the right.
Looking ahead to FIGURE 8 - will help you with
correct player and rod handle assembly onto rods.
Place one C5 Rod Washer, C4 Rod Bumper and
one C5 Rod Washer on each rod as shown in
FIGURE 6.
= C9 Red Shirt / White Short Player
= C10 One Player Rod Stop
= C4 Rod Bumper
= C5 Rod Washer
STEP 7:
Align C9 Red Shirt / White Short Player and C10 One
Player Rod Stop to each player hole and attach using
C6 Bolts with C7 Lock Nut as shown in FIGURE 7
and DETAIL B.
Attach P10 Rod End Caps to the rod as shown in
FIGURE 7.
Slide P6 Rod Handle onto each rod end with the
small hole shown in FIGURE 7.
IMPORTANT NOTE: A small amount of liquid
soap applied inside each P6 Rod Handle will
allow them to slip onto rod easier.
DETAIL B
C6
C9
Rod
All Rights Reserved.
© 2019 Escalade Sports
PARTS REQUIRED:
16 pcs - C5 Rod Washer
13 pcs - C6 Phillips Round
Head Bolt
13 pcs - C7 Lock Nut
Rod Bushing
Note: Rod Bushings are
already attached onto
each P1 Side Apron.
) and
) on rod as shown in
Soccerman
facing up
C7
11 pcs - C9 Red Shirt / White Short Player
2 pcs - C10 One Player Rod Stop
4 pcs - P6 Rod Handle
4 pcs - P10 Rod End Cap
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
RIGHT
C2
3 Player Rod
FIGURE 7
For Customer Service Call 1-888-996-2729
9
Hole / Handle End
C1 C3
5 Player Rod 2 Player Rod
P6
Rod Handle
P10
Rod End Cap
LEFT
C2
3 Player Rod
FIGURE 6
P6
Rod Handle
Note:
Small
Hole