Special Safety Instructions - EDM Product 08708 Manual De Instrucciones

HEAT GUN 2000W

SPECIAL SAFETY INSTRUCTIONS

Hold the tool by the insulated gripping surfaces when
performing an operation in which the cutting unit may
come into contact with an unrequired wiring or its own
power cable.
Contact with a "live" wire can also "energize" the exposed
metal parts of the power tool and cause an electric shock to
the operator.
Keep drills, drills and other cutting accessories in good
condition. This will improve the cut and reduce the load on
the machine by ensuring a longer life of the cutting tools
and the machine. Use only drill bits, guides and cutting
accessories recommended by the manufacturer.
EN INSTRUCTION MANUAL
Do not attempt to modify the machine or its accessories in
any way.
Do not force the machine, let it do the work and reduce
wear on the machine and cutting accessories by increasing
its efficiency and life.
Wear approved safety glasses, a dust mask and hearing
protection during prolonged use. When using the machine
at a higher height of your head, wear a safety helmet, safety
glasses and an approved dust mask. Do not attempt to
change any selection switch while the engine is running.
This could damage the machine.
REF. 08708