Charger Operation; Charging The Batteries - SNOWJOE 24V-X2-20SB-CT Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Charger Operation

TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless snow blower you will
need two batteries and one charger from the iON+ 24V
System. See page 17 for battery and charger options and
specifications, or for more information visit snowjoe.com.
m
WARNING!
Charge only iON+ 24V lithium-ion battery
packs with their compatible iON+ 24V lithium-ion charger. Other
types of batteries may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
When to Charge the iON+ 24V
Lithium-iON Battery
NOTE: The iON+ 24V lithium-ion battery packs do not develop
a "memory" when charged after only a partial discharge.
Therefore, it is not necessary to run down the battery packs
before placing them into the charger.
• Use the battery charge indicator lights to determine when to
charge your iON+ 24V lithium-ion battery packs.
• You can "top-off" your battery packs' charge before starting
a big job or after a long day of use.

Charging the Batteries

1. Open the battery compartment cover to expose the
batteries. Press the push lock buttons on the batteries to
pull them out of the equipment (Fig. 1).
Fig. 1
2. Depending on your Snow Joe
model, how to recharge your lithium-ion batteries will
vary. You may either insert your 24-volt batteries into the
24VCHRG-QC Quick Charger (sold separately) or the
24VCHRG-DPC-2 Dual Port Charger (sold separately)
(Figs. 2 – 3).
Battery compartment
cover
Battery
Push lock button
+ Sun Joe
charger
®
®
Fig. 2
Battery pack
Charging
red
24VCHRG-QC
quick charger
(Sold separately)
Fully
Charged
green
Fig. 3
Charging
red
Fully
Charged
green
3. The battery indicator LEDs will illuminate one by one
during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
4. The 24VCHRG-QC Quick Charger (sold separately) and
the 24VCHRG-DPC-2 Dual Port Charger (sold separately)
are also equipped with additional charging indicating
lights which will indicate the charging status (Figs. 2 – 3).
m
CAUTION!
FIRE HAZARD. When remove the batteries
from the charger, be sure to unplug the charger from the outlet
first, then remove the batteries from the charger.
m
WARNING!
This charger does not automatically turn
off when the batteries are fully charged. Please take care not
to leave the batteries in the charger. Switch off or unplug the
charger at the mains when charging is complete.
5. Timely recharging of the batteries will help prolong the
batteries' life. You must recharge the battery packs when
you notice a drop in the equipment's power.
9
Battery packs
24VCHRG-DPC-2 dual port
charger (Sold separately)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

24v-x2-20sb

Tabla de contenido