Care And Maintenance - Allen + Roth SB6030L-W Manual Del Usuario

CARE AND MAINTENANCE

• Do not use any abrasive cleaners or metal scrapers.
• If drywall mud or plaster gets on the shower base surface, it may be carefully removed with a
wooden scraper made from a piece of scrap wood.
• Adhesive may be removed with mineral spirits.
• Ideal cleaners are Formula 409
SCRATCH REMOVAL INSTRUCTIONS
For effective scratch removal and polishing, you will need to purchase these items:
• 1 Sheet 1000 Grit 3M
• 1 Sheet 1500 Grit 3M
• 1 Sheet 2000 Grit 3M
• 1 small container of 3M
These items can be purchased at most auto supply stores that provide supplies to professional
paint and body shops. Call before you go. Not all auto supply stores will have these items.
1. Start sanding with 2000 grit paper. Use small squares of paper about 2" x 2" for all sanding
and use lots of water. The water serves as both a lubricant and to prevent residue buildup on the
paper. Residue buildup shortens the effective life of the paper and may scratch the surface
you're trying to polish.
2. 2000 grit paper is the finest grit available - the higher the number, the finer the grit. If you can't
remove all of the scratches with 2000 grit, switch to 1500 grit. Remember to wash the paper
frequently with water as you sand.
3. If all of the scratches can't be removed with 1500 grit, switch to 1000 grit. This should remove
most fine scratches. If you have deep scratches or a gouge, course paper may actually put more
scratches than it removes.
4. Once you have removed all of the scratches by sanding with the finest paper possible, repeat
the sanding process using successively finer grits of paper until you've once again sanded with
2000 grit.
6. Now use 3M rubbing compound #05933 on a soft, damp cloth. Polish using considerable
®
pressure to produce a smooth, shiny finish.
, Lysol Bathroom Cleaner
®
Wet-Dry sandpaper
®
Wet-Dry sandpaper
®
Wet-Dry sandpaper
®
Rubbing Compound #05933
®
or Comet Gel
®
8
.
®