Jam HX-TTP200WDA Manual De Instrucciones página 4

WHAT'S IN THE BOX
Turntable, AC power cord.
USING THE TURNTABLE
Plug the supplied power cord into the AC socket on the back of the
turntable and connect to the mains.
Ensure the unit is on by pressing in the power button. u
Remove the tone arm lock. v
Push the lift handle to raise the tone arm. w
Select the speed - 33, 45 or 78 RPM as required x
Remove the white plastic needle guard y. Keep this in a safe place,
you'll need to put it back on when you're finished.
Put a record on the turntable. z
Move the tone arm to the desired position on the record {.
The record will start turning as the tone arm moves across.
Pull the lift handle forward to lower the tone arm and the record will
start playing. |
When you have finished, manually remove the tone arm from the
record by using the lift handle w and return to the rest holder. The
record will stop turning at this point. Press the power button to
switch off the turntable.
CONNECTING TO SPEAKERS OR OTHER DEVICES
Connecting to a device with RCA input
To connect the turntable to devices with RCA input, use an RCA to
RCA cable (available separately). Connect the RCA plugs on one end
of the cable to the L and R sockets on the back of the turntable and
the plugs at the other end to the corresponding L and R sockets on
the back of the device.
Connecting to a device with AUX input
To connect the turntable to a device with an AUX input, use a RCA to
AUX cable (available separately). Connect the RCA plugs to the L and
R sockets on the back of the turntable and the AUX plug to the AUX
socket on the back of the device.
USING THE 45 RPM ADAPTOR
The 45 RPM adaptor allows you to play 45 RPM records:
1. Place the 45 RPM adaptor over the spindle
2. Gently place your 45 RPM record onto the turntable
3. Follow the operation instructions left to play your record.
MAINTENANCE
• DO NOT leave vinyl records on the turntable after use. Return
• the vinyl record to its original packaging and store.
• Return the tone arm to it's original place after use and secure with
tone arm lock.
• Replace the white plastic needle guard after use. Close the
turntable cover to avoid dust damage.
• Unplug the power cable and other cables after use.
• Please note, the stylus cartridge can be easily damaged and is
NOT included in the product warranty. For replacement stylus
cartridges, please contact Customer Service (details on back of this
leaflet).
WEEE EXPLANATION
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
LISTEN RESPONSIBLY
To prevent possible hearing damage, do not listen at high
volume levels for long periods.