Pre Operation - Skymsen SILENZIO Manual De Instrucciones

Make sure that the network voltage is the same as the machine voltage

2.2 Pre Operation

Before using the machine all parts
that get in contact with food must
be washed with running water and
neutral soap. To clean your Blender
read item 3.4 Cleaning.
Make sure the blender is stable on its
working place.
2.2.1 Procedure to Assemble the Cup :
1 – Place the sealing ring n°01 on the
central bearing n°02, Pic (02).
2 – Fit the central bearing n°02 plus
the sealing ring n°01 in the cup's base
n°03, Pic (02).
3 – Thread the cup n°04 in the cup's
base n°03.
2.2.2 Placing the Cup
The Cup # 03 (Pic.01) has a versatile fitting system allowing an easy, quick and safe placing.
To remove or to place the Cup # 03 (Pic.01) just lift it using the handle . Do always use the
handle with a firm hold to remove or to place the Cup .
8
IMPORTANT
PICTURE 02
06
05
04
01
02
03