Tabla De Contenido; Prepare Your Pool; Decide On The Suction Connection - STA-RITE Calypso GW7000 Manual De Instalación, Operación Y Repuestos

PLEASE READ THE FOLLOWING
BEFORE INSTALLING YOUR
CALYPSO POOL CLEANER!
About Safety:
This is the safety alert symbol. When you see this
symbol on your system or in this manual, look for one of
the following signal words and be alert to the potential for
personal injury.
warns about hazards that will cause death,
serious personal injury, or major property damage if
ignored.
warns about hazards that can cause death,
serious personal injury, or major property damage if
ignored.
warns about hazards that will or can cause
minor personal injury or property damage if ignored.
Carefully read and follow all safety instructions in this
manual and on equipment. Keep safety labels in good con-
dition; replace if missing or damaged.
Congratulations on the purchase of your new Calypso au-
tomatic pool cleaner. This manual will guide you through
the steps needed to install and operate it. Please read it
carefully.
Hose can trip or entangle swimmers. Do not
allow swimmers in pool while cleaner is operating.
Flapper Valve may injure hands or fingers.
Stop pump before attempting to cleanout pool cleaner
head.
Hazardous suction.
Can trap and tear
hair or body parts.
Can cause drowning.
Do not play with cleaner
or hose or apply to body.
Do not let children use or
play with pool cleaner.
Stop pump before
attempting to clean unit.
Do not allow swimmers in
pool while pool cleaner is
operating.
CONTENTS:
Prepare Your Pool ...........................................................2
Decide on the Suction Connection .................................2
Unpack and Assemble Your Calypso ...........................2-3
Install Your Calypso .....................................................4-6
Optimizing Performance..............................................6-7
Maintenance ...................................................................8
Troubleshooting .........................................................9-10
Parts and Disassembly..............................................11-14
Warranty .......................................................................15

PREPARE YOUR POOL

Before installing your Calypso, clean your filter system and
empty all leaf baskets. A clean filter system is necessary for
proper operation of automatic pool cleaners. It will also
lessen the load on your pump and reduce electricity and
pump repair bills.
Prepare your pool as follows:
1. Manually vacuum the pool
2. Brush the walls and other parts of the pool surface to
lift off grime and algae.
3. Clean the filter and remove debris from the pump trap
and skimmer baskets.
4. Chemically balance the pool water.
DECIDE ON THE SUCTION
CONNECTION
Suction entrapment, injury, and drowning
hazard. If your pool has a dedicated suction port ("vac
port") for vacuuming or for an automatic pool cleaner, it
must be covered when not in use. A spring loaded safety
cover (a "vac port fitting") is included with your cleaner.
Install it on the suction port to prevent entrapment and in-
jury. If the cover provided does not fit, purchase one that
does from your local pool store and install it instead. The
cover should conform to IAPMO SPS4-99A.
1. Decide on the suction connection you will use -
either a dedicated wall fitting or a skimmer.
2. Identify the filter valves that control water flow through
the intakes in your pool. When you install the Calypso
you will adjust the valves (if your system has valves) of
your pump/filter to draw the water through the chosen
connection.
UNPACK AND ASSEMBLE YOUR
CALYPSO (Figures 1 and 2)
1. Open the box and make sure that you have the follow-
ing items. Note that the Calypso's unique bumper and
roller assembly may have been attached prior to ship-
ment. If it is not attached, follow the instructions to at-
tach it yourself.
2