Installing The Door - Home Decorators Collection Silverthorne MTVSC2513SE-2 Guía De Uso Y Cuidado

Assembly (continued)
10
Preparing the door for installation
□ locate the right door (i) and left door (h) and place on a soft surface to
protect the finish .
□ Place the open side of each hinge (GG) into the recessed area on
each of the right door (i) and left door (h) . insert and tighten two
hinge screws (FF) into each of the two holes in each hinge . do not
overtighten screws .
11

installing the door

□ line up and insert the other end of the door hinges (GG) into the
recessions in the left and right side exterior panels (d) of the
assembled mantel .
□ secure the door hinges (GG) to the mantle using eight screws
(FF) .
□ secure the handles (hh) to the left and right doors (h,i) by
inserting the handle bolts (dd) through the left and right doors
(h,i) and tighten until snug .
12
inserting the firebox
□ attach the top trim (Q) (optional) with the 3
screws (QQ) provided (spare included) .
□ insert the firebox insert (P) into the mantel from the rear . Be
very careful not to scratch the base (C) .
□ viewing from the front of the mantel, ensure that the firebox
insert (P) is in the center of the opening .
x3
Q
10
FF
DD
QQ
FF
GG
GG
1
2
HH
P
l