English - Corsair K63 WIRELESS Manual De Instrucciones

ENGLISH

CONGRATULATIONS!
Experience ultimate gaming freedom with the CORSAIR K63 Wireless Mechanical Gaming Keyboard
featuring ultra-fast, 1ms 2.4 GHz wireless technology combined with CHERRY MX mechanical
keyswitches for maximum performance. Advanced wireless features include Bluetooth 4.2 for flexible
connectivity and 128-bit AES wireless encryption to help protect the transmission of your data. The
compact, tenkeyless design is space saving and travel friendly with up to 25 hours of battery life at
low brightness. Vibrant, blue LED backlighting is customizable per-key using iCUE software to create
dynamic lighting effects. Dedicated multimedia controls, 100% anti-ghosting, full-key rollover, and
Windows key lock mode delivers complete and responsive control. Detachable, soft-touch wrist rest
provides comfort to enhance your gameplay.
BEFORE FIRST USE
The K63 wireless keyboard must be fully charged before its first use.
EXTENDING BATTERY LIFE
Reducing brightness to low (33%) will provide up to 25 hours of battery life. Increased brightness levels
will use more power and reduce battery life.
LOW POWER MODES
The keyboard will turn off the backlighting after 15 minutes and go to sleep which will greatly extend
battery life. This setting can be adjusted or disabled via the iCUE software (corsair.com/downloads).
When the battery level is critical, the backlighting will automatically turn off to ensure continued usage,
and will return once the keyboard is recharged.
FACTORY RESET
To reset the keyboard to factory settings, hold the ESC key while turning the keyboard on, then release
the ESC key after two seconds. The keyboard will then power on normally.
1
CHARGING THE KEYBOARD
Connect the K63 wireless keyboard to an available USB 3.0 or USB 3.1 (Type-A) port on your PC with
the USB charging/data cable. The keyboard's power LED indicator will begin pulsing green to denote
battery charging and will turn solid green when charging is complete.
WARNING: Connecting to a USB 2.0 port could result in reduced charging speed or
connection issues.
The power LED indicator will briefly blink a color corresponding to the battery charge level when
first turned on and will turn red when charging is required. The battery has no "memory effect" and
should not be completely discharged before recharging to ensure it will last for hundreds of charge/
discharge cycles.
NOTE: Reducing brightness, unplugging power when charged, and not leaving the battery
discharged for long periods of time will help to maximize battery life.*
POWER LED INDICATOR
WHITE
GREEN
PULSING GREEN
RED
PULSING RED
*Rechargeable batteries have a limited life.
SETTING UP YOUR KEYBOARD FOR WINDOWS
> Turn on your computer and K63 wireless keyboard.
> Connect the USB wireless receiver to an available USB 2.0 or USB 3.0 port on your PC and press
FN + F9 on the keyboard.
> The wireless LED indicator on the keyboard will turn solid white when automatically connected.
NOTE: If the connection isn't automatic, initiate pairing mode in the iCUE software and hold FN + F9
on the keyboard until the wireless LED indicator rapidly blinks white.
For the best 2.4 GHz wireless performance, move the USB wireless receiver closer to the keyboard
either by plugging it into a front panel USB port on your PC or by connecting it to the USB charging/
data cable via the USB cable adapter.
STATUS
NORMAL OPERATION
BATTERY CHARGED
BATTERY CHARGING
BATTERY LOW, RECHARGE SOON
BATTERY CRITICAL, RECHARGE REQUIRED
USING 2.4 GHz WIRELESS
®
ENGLISH
2