Setting The Central Control Address - LG PQRCFCS0 Manual De Instalación Y Propietario

Setting the Central-Control Address
Please set the address when using the central controller.
You don't need to set address If you don't use central controller.
PQRCFCS0
Defrost Preheat Out door
ROOM FAN
TEMP SPEED
• Multi-Model: Connect the outdoor unit with PI485 for the outdoor unit
• Single-Model: Connect the indoor unit with PI485 for the indoor unit
• If you connect the indoor unit to the central controller, you should set the network
address of the indoor unit so that the central controller could recognize it.
• The center-control address is composed of the group number and the indoor-unit
number.
All manuals and user guides at all-guides.com
1
2
Room Temp
Total on
Central Run
3
Necessary function before using
If you want to set the address on the temperature
display, press the two temperature control buttons
( / ) at the same time for three seconds.
Press the temperature-decreasing button to change
the group number. Press the temperature-increasing
button to change the indoor unit number.
EX) Group Address: 2
Indoor Unit Number: 3
Set the address by pressing the two temperature
control buttons ( / ) at the same time for three
seconds.
Owner's & Installation Manual 9