Forch INOX CLEANER 350 W Manual De Instrucciones página 19

Equipo de limpieza de cordones de soldadura
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
Language Setting
Please make sure that the device is switched off and in a voltage-free state.
Open the INOX CLEANER 350 W by loosening the 8 screws of the housing.
For the respective language code please refer to the language code table hereafter
To set the language, move the fi rst three switches (S1, S2, S3) of the DIP-bar into
the indicated position.
The position of the DIP-bar can be found in the installation instructions.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

5462 100

Tabla de contenido