Setting The Volume; Selecting The Chime - lidl HG00783A-TX Manual De Instrucciones

Note: The product has 16 different chimes.
18 US-EN
320257_silv_Design-Funktuerklingel_content_US.indd 18
Press the signal type selector button
will sound. The receiver will now indicate the door signal acousti-
cally. Press the signal type selector button
will now indicate the door signal optically.
When the receiver battery is drained, the signal indicator will flash.
You can replace the used battery with a new one of the same type.

Setting the volume

Press the volume button
There are a total of 4 possible volume settings: very loud, loud,
medium, soft.

Selecting the chime

Press the melody selection button
sounds.
Press the melody selection button
next audible signal.
Repeat this process until you have selected your desired audible
signal. The last-selected audible signal is automatically stored.
again. An acoustic signal
3
3
until the desired volume is reached.
5
. The first audible signal
4
again to move on to the
4
again. The receiver
01.03.19 12:13