MoJack PRO Instrucciones De Montaje Y Funcionamiento página 2

MoJack WorkBench
Introduction
The MoJack WorkBench Attachement is for use with MoJack EZ, MoJack EZ Max, MoJack XT, MoJack 750XT,
MoJack PRO, Craftsman CR500 and Troy-Bilt TB500ML mower lifts (sold separately). For any problems or
concerns with lifting your MoJack Workbench, consult the owner's manual for your riding mower lift model.
For technical assistance or replacement parts please contact MoJack at 1-877-575-3173.
NOTE: Please save this manual for future reference.
Need Assistance?
Please DO NOT return this product to the store.
Our Customer Service Department
is ready to help!
1-877-575-3173
2
This manual contains assembly, parts, operating,
maintenance, adjustment and safety instructions for
your MoJack WorkBench accessory.
BEFORE USING YOUR MOJACK WORKBENCH,
CAREFULLY READ THIS MANUAL IN ITS
ENTIRETY.
By following these operating, maintenance and safety
instructions, you will prolong the life of your mower lift
and accessories and promote safe operation.
If additional information is needed, or should you
require a trained service mechanic, contact your
authorized MoJack equipment dealer or distributor.
All MoJack parts are thoroughly tested and inspected
before leaving the factory to ensure that they comply
with all relevant safety standards.
Submit your questions online at:
Envie sus preguntas por Internet a:
www.theMoJack.com
¿Necesita ayuda?
¡NO devuelva este producto a la tienda!
¡Nuestro Departamento de Servicio de Atención al
Cliente está listo para ayudarle!
1-877-575-3173