Charging - Bellman & Symfon AUDIO DOMINO CLASSIC BETXAUD2 Manual De Instrucciones

Charging

Both the Transmitter and Receiver Units are supplied with built-in rechargeable
batteries. The batteries in both the Transmitter and Receiver Units must be
charged before using the products for the first time.
Bellman Audio Domino Classic contains Lithium-Ion batteries and a universal
charger with plugs for the EU, United Kingdom, USA and Australia to suit the
majority of wall sockets used around the world.
Warning: The product may only be charged with the charger supplied or
using accessories from Bellman & Symfon.
Connect the charger as illustrated in the fold-out section of the manual.
Select the mains plug for the appropriate region and check that it is locked
properly before it is connected to the wall socket. When the charging connec-
tors are connected to the charger, the Transmitter Unit and the Receiver Unit,
the Battery Status LEDs (3 and 17) change from green to orange to indicate that
charging is taking place. When charging is finished, after about 2.5 hours, the
LEDs turn green again. You can charge one unit at a time or two at the same
time.
BE2250_001MAN005_book.indb 61
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
61
2017-06-13 16:42:04