Establishing A Temporary Link With Another Transmitter Unit - Bellman & Symfon AUDIO DOMINO CLASSIC BETXAUD2 Manual De Instrucciones

Establishing a temporary link with another Transmitter Unit

The radio link between the Transmitter and Receiver Units in the Bellman Audio
Domino Classic must be established in order for radio communication to oper-
ate. To make it easy to get started, Receiver Units and Transmitter Units which
are supplied together are always paired up so that they will work together.
Whenever you want to listen on another Transmitter Unit you can establish a
temporary link with it. As soon as you switch off the Receiver Unit it returns to
working with the paired Transmitter Unit again. Proceed as follows to establish
a temporary radio link between a transmitter and a receiver:
• Start both the units with the On/Off buttons (6, 18).
• Hold down
CONNECT
• Hold down both the M button (5) and the R button (7) on the Receiver Unit.
5 s
BE2250_001MAN005_book.indb 69
(19) on the Transmitter Unit.
5 s
A "running light" on the
Receiver Unit's Volume
and Tone LED Indicator (8)
moving towards the centre
indicates that the link has
been established.
2017-06-13 16:42:04
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
69