SPORTSTECH BRT50 Manual De Instrucciones página 5

1. Attach the feet [4] to the vertical frame [5] so that you
can connect the two with six washers and screws (2).
2. Place the main frame [6] on top of the vertical frame
[5]. Connect the components with six washers and
screws (2).
3. Fasten the four angle connectors [7] to the main frame
[6] with two screws, four washers and two nuts (3).
4. Screw the support surface [8] onto the angle connector
[7] with four washers and screws (1).
SPAREPARTS
https://service.innovamaxx.de/brt50_spareparts
ASSEMBLY
Firmly tighten all component parts
and pre-assembled parts!
1
2
3
4
5
2
2
EN
3
1