- On clothes with protrudes or applications, avoid contact
with the applications or protrudes. (Fig.5).
- On clothes with patterns, move the appliance in the direc-
tion of the pattern for better results. (Fig.6).
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance from the mains.
- Remove the fluff container and empty it accordingly.
(Fig.7).
- Clean the appliance.
CLEANING
- Disconnect the battery charger from the mains and allow
it to cool before undertaking any cleaning task.
- Disassemble the appliance in accordance with the follo-
wing steps:
- Take off the remover circle. (Fig.8).
- Remove the outer foil as arrow direction. (Fig.9).
- Take out the rotative blades and clean the blades shaft
with the brush. (Fig.10).
- everselly install the blades and outer foil into the applian-
ce. (Fig.11).
- Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
- Never submerge the appliance in water or any other liquid
or place it under running water.