Far Tools Tecnum Z1C-32ECT Traduccion Del Manual De Instrucciones Originales página 13

EN
Description et repérage des organes de la machine
FIG. A & B
Switch and vari-speed switch
01
-
02
Selector drilling/impact/chipping
03
Depth stop
04
Side handle
05
SDS Chuck
06
Splash guard
07
Jar of grease
08
-
09
-
10
Contenu du carton
FIG. C
Assemblage de la machine
FIG. D
Assembly of the side handle
01
Mounting of depth guide
02
Mounting of dust cap (> E2)
03
Fonctionnalité de la machine
FIG. E
Start-up of the machine, adjusting the speed
01
Using the splash guard
02
Use of the 4 functions:
03
- Piercing
- Percussion-chiseling
- Chiseling
- Fixed chiseling
Use of the depth stop
04
Use of the side handle ( > D1)
05
Lubrication
06
-
07
-
08
-
09
-
10
Réglages de la machine
FIG. F
-
01
-
02
Remplacement des consommables
FIG. G
Drills, chisels and chuck
01
-
02
715310-Manual-A.indd 13 715310-Manual-A.indd 13
Maintenance, recommendations and advice
FIG. H
The use of suitable accessories in good
01
condition will ensure the machine operates
optimally.
Do not use the impact function for screwing
02
or drilling in fragile materials.
Always use a wall plug that is suitable for the
03
material and for the object to be attached.
You do not need to force hard on the machine.
04
The rotary hammer works thanks to its impact force
and its own weight. You can save your energy.
You must always work in a stable position.
05
It is a powerful machine (read the safety rules carefully) .
Lubrication.
06
EN
24/06/2020 14:48 24/06/2020 14:48