Customer Service - Klein Tools 93PLL Manual De Instrucciones

ENGLISH
• Regularly inspect ports and charging cable for and debris, dirt, damage, and
corrosion.
• DO NOT attempt to repair device or cable; replace as needed.
Be sure instrument is turned off and disconnected from all power sources. Wipe
with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents.
Recharge as needed. There are no pre-designated intervals at which to recharge as
long as you are using the unit regularly. Avoid discharging completely on a regular
basis, as this can impact overall life.
If storing for more than one month, charge completely before storage, and
recharge approximately every three months to avoid full discharge. Store in
cool temperatures, mild humidity, and away from direct sunlight (See GENERAL
SPECIFICATIONS section).
Leaving in a vehicle or other confined spaces in extreme hot temperatures can lead
to decrease in service life, overheating, or fire. Extreme cold temperatures below the
specified storage range can also harm performance and service life. Keep away from
corrosive chemicals and gases.
After taking out of storage, inspect visually to make sure device and all accessories
look satisfactory. Allow unit to return to ambient conditions before recharging.
Do not place equipment and its accessories in the trash. Items must be properly
disposed of in accordance with local regulations. Please see www.epa.gov or
www.erecycle.org for additional information.
450 Bond Street Lincolnshire, IL 60069 1-800-553-4676
customerservice@kleintools.com
8
MAINTENANCE
CLEANING
RECHARGING
STORAGE
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
www.kleintools.com