Technical Specifications - VONROC RH501DC Traducción Del Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32

TECHNICAL SPECIFICATIONS

This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Batteries
Model No.
included
RH501DC
-
S_RH501DC
CD801AA
S2_RH501DC
2 x CD801AA
S3_RH501DC
CD803AA
Machine information
Rated voltage
No-load speed
Impact rate
Max. Drill diameter
- Concrete
- Steel
- Wood
Weight
Sound pressure (LPA)
Acoustic power (LWA)
Hammer drilling concrete a
h,HD
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
WWW.VONROC.COM
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Chargers
Weight
included
-
CD802AA
Only use the following batteries of the VONROC
CD802AA
VPOWER 20V battery platform. Using any other
batteries could cause serious injury or damage the
CD802AA
tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
20V
The following charger of the can be used to charge
0-900 /min
these batteries.
0-5000 /min
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
Ø 10 mm
Ø 8 mm
platform are interchangeable with all the VONROC
Ø 16 mm
VPOWER 20V battery platform tools.
1.2 kg
Vibration level
88 dB(A) K=3 dB (A)
The vibration emission level stated in this instruc-
99 dB(A) K=3 dB (A)
tion manual has been measured in accordance
with a standardized test given in EN 60745; it may
8.9 m/s² K=1.5 m/s²
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
CD801AA
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
Lithium-Ion
20V
2.0 Ah
• The times when the tool is switched off or when
CD802AA
0.3 kg
Protect yourself against the effects of vibration by
CD803AA
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
Wear hearing protection.
different or poorly maintained accessories, may
significantly increase the exposure level.
it is running but not actually doing the job, may
significantly reduce the exposure level.
EN
CD802AA
220-240V, 50Hz 0.4A
21V
2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

S rh501dcS2 rh501dcS3 rh501dc

Tabla de contenido