Philips PerfectCare Elite Manual Del Usuario página 5

If you live in an area with very hard water, scale builds up
quickly. In this case it is recommended to use distilled water
to prolong the life of your appliance.
2 Put the water tank back into the appliance by sliding in the
bottom part first. Then push the top part until it locks into
place.
'Water tank empty' light
When the water tank is almost empty, the 'water tank
empty' light goes on. Fill the water tank and press the steam
trigger to let the appliance heat up again. When the 'iron ready'
light lights up continuously, you can continue steam ironing.
OptimalTEMP Technology
The OptimalTEMP Technology enables you to iron all types
of ironable fabrics, in any order, without adjusting the iron
temperature setting.
Fabrics with these symbols are ironable, for example linen,
cotton, polyester, silk, wool, viscose and rayon.
Fabrics with this symbol are not ironable. These fabrics include
synthetic fabrics such as Spandex or elastane, Spandex-mixed
fabrics and polyolefins (e.g. polypropylene), but also prints on
garments.
Ironing
1 Place the steam generator on a stable and even surface.
2 Make sure that there is enough water in the water tank
(see section 'Filling the water tank').
3 Put the mains plug in an earthed wall socket and press the
on/off button to switch on the steam generator. The blue
power-on light on the appliance and the 'iron ready' light
start to flash to indicate that the appliance is heating up
(this takes approx. 2 minutes).
When the appliance is ready for use, the 'iron ready
,
light' and the power-on light stop flashing and light up
continuously.
ENGLISH
7