Ameriphone ALERTMASTER AM-100 Guía De Usuario página 15

Channel Setting
AM-100 base unit.
(See Figure 5)
2. Open the battery
compartment of the
door bell to access DIP
switches.(See Figure 2)
to open door bell
cover.)
3. Change the switch
position of each switch
on both units using a
ball point pen to slide
the switches to different
settings. All settings
need to be identical for
the system to work.
12
All manuals and user guides at all-guides.com
4. Unplug and change
the switch settings on
each of your other
accessories (Remote
Receiver, Door
Announcer, etc.) to
match the new channel
setting of the AM-100
base unit and door
bell.
5. Replace covers and
re-turn accessories to
their proper place.