Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-
erty damage! Retain instructions for future reference.
Speedaire
Spray Guns
Description
Speedaire air operated spray guns are designed to perform a variety of painting,
coating, and finishing applications using the power of compressed air.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an imminently
hazardous situation which, if not avoided,
WILL result in death or serious injury.
Warning indicates
a potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
Caution indicates a
potentially
hazardous situation which, if not avoided,
MAY result in minor or moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
Unpacking
After unpacking the product, inspect
carefully for any damage that may
have occurred during transit. Make
sure to tighten fittings, bolts, etc.,
before putting unit into service.
Do not operate
tool if damaged
during shipping, handling or use.
Damage could result in bursting and
cause injury or property damage.
General Safety Information
GENERAL SAFETY INFORMATION
1. Read all manuals
included with this
product carefully. Be
thoroughly familiar with
the controls and the
proper use of the equipment.
Form 5s6322
©
Siphon Feed - Conventional
2. Follow all local electrical and safety
codes as well as the United States
National Electrical Codes (NEC) and
Occupational Safety and Health Act
(OSHA).
CALIFORNIA PROPOSITION 65
or its power cord may contain
chemicals known to the State
of California to cause cancer
and birth defects or other reproductive
harm. Wash hands after handling.
drill or grind materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm. Wear
protective gear.
WORK AREA
• Never spray closer
than 25 feet to the
compressor! If
possible, locate
compressor in separate
room. Never spray into the
compressor, compressor controls or
the motor.
• Do not spray
flammable materials in
vicinity of open flame
or near ignition
sources. Motors,
electrical equipment and controls can
cause electrical arcs that will ignite a
flammable gas or vapor. Never store
flammable liquids or gases in the
MANUAL
vicinity of the compressor.
• Do not smoke or eat when spraying
paint, insecticides, or other
flammable substances.
Printed in China
09666
1208/538/VCPVP
2Z366H, 4XP62B, 4XP63B and 4RR06B
• Keep hose away from sharp objects.
Bursting air hoses may cause injury.
Examine air hoses regularly and
replace if damaged.
This
• Always work in a clean environment.
product
To avoid injury or damage to the
workpiece, do not aim the spray gun
at any dust or debris.
• Keep visitors away and NEVER allow
children or pets in the work area.
You can create dust
PERSONAL SAFETY
when you cut, sand,
• Use a face
mask/respirator, non-
skid shoes, and
protective clothing
when spraying. Always spray in a
well ventilated area to prevent
health and fire hazards. Refer to
Material Safety Data Sheets (MSDS)
of spray material for details.
• Always wear eye
protection
• Never use oxygen, carbon dioxide,
combustible gases or any bottled gas
as an air source for the spray gun.
Such gases are capable of explosion
and serious injury to persons.
• Do not misuse this product. Excessive
exposure to vibration, work in
awkward positions, and repetitive
work motions can cause injury to
hands and arms. Stop using any tool
if discomfort, numbness, tingling, or
pain occur, and consult a physician.
• Never aim or spray at yourself or anyone
else or serious injury could occur.
IN268702AV 12/08
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Speedaire 2Z366H

  • Página 1 Speedaire Siphon Feed - Conventional Spray Guns Description Speedaire air operated spray guns are designed to perform a variety of painting, coating, and finishing applications using the power of compressed air. Safety Guidelines 2. Follow all local electrical and safety...
  • Página 2 2Z366H, 4XP62B, 4XP63B and 4RR06B Speedaire Operating Instructions © Speedaire Siphon Feed - Conventional Spray Guns General Safety Information Gravity Feed – Method of paint feed (continued) similar to the siphon feed method. • Avoid unintentional starting. Be sure However, the cup is inverted to create a the trigger is off before connecting to •...
  • Página 3 Speedaire Operating Instructions Models 2Z366H, 4XP62B, 4XP63B and 4RR06B WATER/OIL IN COMPRESSED AIR Fluid Control All compressor pumps discharge some condensed water, oil or contaminates with Knob the compressed air. IMPORTANT: This condensation will cause “fish eyes” to appear in the paint job.
  • Página 4 2Z366H, 4XP62B, 4XP63B and 4RR06B Speedaire Operating Instructions © Speedaire Siphon Feed - Conventional Spray Guns Packing Nut (Fluid Needle) Maintenance Air Cap Pattern Control Knob Fluid Tip DAILY CLEAN-UP (Nozzle) Fluid Control Knob Local codes may require specific cleaning methods and equipment.
  • Página 5 Speedaire Operating Instructions Models 2Z366H, 4XP62B, 4XP63B and 4RR06B Maintenance (continued) 2. A brush or toothpick or something 5. Unscrew packing nuts and replace 6. Use a non-silicone oil on all moving similar may be used to dislodge the the packing ONLY if a leak will not dried paint from holes and passages.
  • Página 6: Troubleshooting Chart

    2Z366H, 4XP62B, 4XP63B and 4RR06B Speedaire Operating Instructions © Speedaire Siphon Feed - Conventional Spray Guns Troubleshooting Chart Symptom Possible Cause(s) Corrective Action Right or left Clean. Use only non-metallic paint Holes in left or right side of the air...
  • Página 7: Pistolas Pulverizadoras Speedaire Sifón - Tradicional

    Pistolas Pulverizadoras Speedaire Tipo Sifón - Tradicional Descripción Las pistolas pulverizadoras Speedaire neumáticas están diseñadas para usarse en una variedad de aplicaciones de pintura, revestimiento y acabado usando aire comprimido. 2. Siga todos los códigos de seguridad Medidas de Seguridad laboral y electricidad establecidos Este manual contiene información que...
  • Página 8: Cuidado Y Uso De La Herramienta

    2Z366H, 4XP62B, 4XP63B y 4RR06B Manual de Instrucciones de Speedaire © Pistolas Pulverizadoras Speedaire Tipo Sifón - Tradicional Informaciones Generales de funcionamiento de la pistola Con Purgador – En este método, el aire Seguridad pulverizadora. Si está dañada, haga (Continuación) circula continuamente a través de la...
  • Página 9: Con Sistema De Alimentación Tipo Sifón - Tradicional/Hvlp

    Manual de Instrucciones de Speedaire Modelos 2Z366H, 4XP62B, 4XP63B y 4RR06B Introducción (Continuación) PRESENCIA DE AGUA/ACEITE EN EL AIRE COMPRIMIDO Sistema de Gravedad – Este método es Todos los cabezales expulsan cierta cantidad de agua condensada, aceite o conta- similar al de sifón. Sin embargo, el envase minantes con el aire comprimido.
  • Página 10: Funcionamiento

    2Z366H, 4XP62B, 4XP63B y 4RR06B Manual de Instrucciones de Speedaire © Pistolas Pulverizadoras Speedaire Tipo Sifón - Tradicional Funcionamiento (Continuación) Tapa de Aire Tuerca (Aguja de Fluído) 4. Oprima el gatillo rápidamente Perilla de Control Boquilla mientras gira la perilla de control de Patrón...
  • Página 11: Mantenimiento

    Manual de Instrucciones de Speedaire Modelos 2Z366H, 4XP62B, 4XP63B y 4RR06B Mantenimiento 5. Después de usar agua para limpiar 5. Sáquele las tuercas que sostienen la pistola cuando haya usado los empaques y reemplácelos SOLO LIMPIEZA DIARIA pinturas a base de agua, rocíe si no puede eliminar la fuga de Los códigos locales tal vez le exijan que...
  • Página 12: Guía De Diagnóstico De Averías

    2Z366H, 4XP62B, 4XP63B y 4RR06B Manual de Instrucciones de Speedaire © Pistolas Pulverizadoras Speedaire Tipo Sifón - Tradicional Guía de Diagnóstico de Averías Problema Posible(s) Causa(s) Acción a Tomar Acumulación de 1. Los orificios a los lados de la tapa de 1.
  • Página 13 Speedaire Pistolets Vaporisateurs à Alimentation par Siphon - Traditionels Description Speedaire les pistolets vaporisateurs pneumatiques sont conçus pour performer une variété d’applications de peinture, d’enduit et de finis tout en utilisant la puis- sance d’air comprimé. Directives de Sécurité 2. Suivre tous les codes de sécurité et •...
  • Página 14: Utilisation Et Entretien De L'outil

    2Z366H, 4XP62B, 4XP63B et 4RR06B Speedaire Instructions d’Utilisation © Speedaire Pistolets Vaporisateurs à Alimentation par Siphon - Traditionels Généralités sur la Sécurité • Toujours vérifier avant d'utiliser du Rechange pour des renseignements pistolet de pulvérisation que la source spécifiques au modèle.
  • Página 15: Réglage De Configuration

    Speedaire Instructions d’Utilisation Modèles 2Z366H, 4XP62B, 4XP63B et 4RR06B Introduction (Suite) EAU/HUILE DANS L’AIR COMPRIMÉ Toutes les pompes de compresseurs d’air relâchent un peu d’eau, d’huile ou être utilisée avec la méthode autres contaminants dans l’air comprimé. d’alimentation sous pression. Ne pas IMPORTANT: Cette condensation causera l’apparition d’...
  • Página 16 2Z366H, 4XP62B, 4XP63B et 4RR06B Speedaire Instructions d’Utilisation © Speedaire Pistolets Vaporisateurs à Alimentation par Siphon - Traditionels Préparation (Suite) Fonctionnement Enduit Enduit Enduit Mince 3. Tourner le bouton de réglage de Mince Épais 1. Commencer à 15,2 - fluide complètement au sens des pulvériser.
  • Página 17: Nettoyage Quotidien

    Speedaire Instructions d’Utilisation Modèles 2Z366H, 4XP62B, 4XP63B et 4RR06B 3. Enlever le capuchon d’air et le Fonctionnement (Suite) 2. Un pinceau ou cure-dent peut être tremper dans un solvant jusqu’à ce utilisé pour forcer la peinture sèche qu’il soit propre: au besoin, utiliser de l’ouverture.
  • Página 18: Guide De Dépannage

    2Z366H, 4XP62B, 4XP63B et 4RR06B Speedaire Instructions d’Utilisation © Speedaire Pistolets Vaporisateurs à Alimentation par Siphon - Traditionels Guide de Dépannage Symptôme Cause(s) Possible(s) Mesure Corrective Configura- 1. Les trous du côté droit ou gauche du 1. Nettoyer. Utiliser seulement la peinture non-métallique tion capuchon d’air sont obstrués...
  • Página 19 Speedaire Instructions d’Utilisation Models 2Z366H, 4XP62B, 4XP63B and 4RR06B Modelos 2Z366H, 4XP62B, 4XP63B y 4RR06B Modèles 2Z366H, 4XP62B, 4XP63B et 4RR06B Notes Notes Ç 7-Fr...
  • Página 20 2Z366H, 4XP62B, 4XP63B and 4RR06B Speedaire Operating Instructions 2Z366H, 4XP62B, 4XP63B y 4RR06B Manual de Instrucciones de Speedaire 2Z366H, 4XP62B, 4XP63B et 4RR06B Speedaire Instructions d’Utilisation © Speedaire Siphon Feed - Conventional Spray Guns © Pistolas Pulverizadoras Speedaire Tipo Sifón - Tradicional ©...

Este manual también es adecuado para:

4xp62b4xp63b4rr06b

Tabla de contenido