Safety Instructions; General Safety Instructions - Virax 262080 Instrucciones De Empleo

Safety instructions

Read and keep these instructions.

General safety instructions

Choosing the tool

Always use the correct tool for the job.

Do not use tools for any other purpose than that for which they have been designed.
Maintenance and storage

Store your tools in a safe place. When not in use, tools should be stored in a dry, closed
place, out of reach of children.

Carefully maintain your tools. Keep them clean for better and safer performance.

Follow the maintenance instructions as well as the recommendations regarding the
changing of accessories.

Keep the handles dry and free of oil or grease.

Check the tool for damage. Before using the tool, always carefully check that its various
parts are operating properly.

Check for incorrect operation of moving parts, seizing of moving parts and breakage of
parts. Check for proper mounting of all parts and any other conditions that may prevent the
perfect operation of the tool. Any guard, switch or other part that is damaged or defective
should be properly repaired or replaced by a qualified technician.

Warning! Use the tool and its accessories in accordance with these safety instructions. Also
remain within the limits of the tool, taking into account the working conditions and the task
to be performed. Using tools for other than the intended tasks can be dangerous.

This tool is in accordance with all the relevant safety rules. All repairs must be performed by
qualified persons using original manufacturer's spare parts. Failure to do so may be
dangerous for the user and cancel the warranty.
User safety instructions:

Keep children away from the tools. Do not allow other people to touch the tool. Keep them
away from your work area.

Wear appropriate clothing. Do not wear loose clothing or jewellery, as they can be caught in
moving parts. Rubber gloves and non-slip footwear are recommended when working out of
doors. Long hair should be worn in a hair net.

Do not overreach. Avoid adopting a tiring position. Keep proper footing and balance at all
times.

Be constantly alert. Pay attention to the task, use common sense and do not operate the
tool when tired.
Safety instructions regarding the work area

Keep the work area tidy. A cluttered work area increases the risk of injury.

Consider the work area environment.

Keep the work area well lit.
9