Machine Information - VONROC HT501DC Traducción Del Manual Original

debris at all times.
• Ensure there are no people of animals within 5
metres of your trimming area.
• Remove the plug from the power socket before
attempting any maintenance.
• After use the tool should be stored so that the
blade is not exposed.
• Hold the power tool by insulated gripping surfa-
ces only, because the cutter blade may contact
hidden wiring. Cutter blade contacting a "live"
wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
ADDITIONAL SAFETY WARNINGS FOR
CORDLESS HEDGE TRIMMER
• Do not charge hedge trimmer in rain, or in wet
locations.
• Do not use battery-operated hedge trimmer in
rain.
• Remove or disconnect battery before servicing,
cleaning, or removing material from the hedge
trimmer.
• Do not dispose of the battery(ies) in a fire. The
cell may explode. Check with local codes for
possible special disposal instructions.
SAFETY WARNINGS FOR BATTERY
a) Do not open the battery. Danger of short-
circuiting.
b) Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
c) In case of damage and improper use of the bat­
tery, vapours may be emitted. Ventilate the area
and seek medical help in case of complaints.
The vapours can irritate the respiratory system.
d) Use the battery only in conjunction with your
Vonroc product. This measure alone protects
the battery against dangerous overload.
e) The battery can be damaged by pointed objects
such as nails or screwdrivers or by force
applied externally. An internal short circuit can
occur and the battery can burn, smoke, explode
or overheat.
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD801AA and CD803AA type rechargea-
ble Battery packs with the charger. Other types of bat-
teries may burst causing personal injury and damage.
WWW.VONROC.COM
a) The appliance is not to be used by persons
(including children) with reduced physical, sen­
sory or mental capabilities, or lack of experien­
ce and knowledge, unless they have been given
supervision or instruction.
b) Children being supervised not to play with the
appliance.
c) Do not recharging non­rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.

2. MACHINE INFORMATION

Intended use
This hedge trimmer is only intended for cutting
branches from shrubs, bushes, ornamental plants
and hedges.
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
Batteries
Model No.
included
HT501DC
-
S_HT501DC
CD801AA
S2_HT501DC
2 x CD801AA
S3_HT501DC
CD803AA
Machine information
Rated voltage
No load speed
Cutting length
Cutting width
Weight
Sound pressure level L
PA
Sound power level L
WA
Vibration value
Chargers
included
-
CD802AA
CD802AA
CD802AA
20V
1.400/min.
510mm
14mm
2.15 kg
79.1 dB (A), KpA=3 dB (A)
90.1 dB (A), KwA=3 dB (A)
1.937 m/s K=1.5 m/s
2 2
7
EN