Machine Information; Technical Specifications - VONROC HT503DC Traducción Del Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
EN

2. MACHINE INFORMATION

Intended use
The machine is intended for domestic use, for cut-
ting and trimming hedges and bushes at elevated
height, while the user is situated on the ground.
The machine is not intended to be used on a ladder
or steps. The machine is not designed to cut grass
and cannot be used as a grass trimmer. This tool is
not intended for commercial or industrial use.

TECHNICAL SPECIFICATIONS

This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifi cations table for the correct
composition and contents of your set.
Batteries
Model No.
included
HT503DC
-
S_ HT503DC
CD801AA
S2_HT503DC
2 x CD801AA
S3_ HT503DC
CD803AA
Machine information
Voltage
Stroke rate at no-load
Blade length
Tooth opening
Length adjustment
Sound pressure level (LpA)
Sound power level (LWA)
Guaranteed LWA
Vibration
Weight
10
Chargers
included
-
CD802AA
CD802AA
CD802AA
20V
1200/min
36cm
23mm
200-260cm
77.9dB, k=3dB
87.8dB, k=3dB
91dB
front handle ah=2.55m/s
2
2
rear handle ah=2.48m/s
2
K=1.5m/s
2.3kg
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA
20V, 2Ah Lithium-Ion
CD803AA
20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA
Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2 - 5.
1. Hedge trimmer head
2. Head adjustment button
3. Head locking ring
4. Hedge trimmer blade
5. Handle locking lever
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD802AA
220-240V, 50Hz 0.4A
21V
2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
CD803AA
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
WWW.VONROC.COM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

S ht503dcS2 ht503dcS3 ht503dc

Tabla de contenido