Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Water spills while moving the unit
• The internal water collection tank is nearly full. Empty the water tank by placing
the unit near a drain or outdoors and remove the base plug. After draining has
completed, replace the base plug and reinstall your unit in the desired location.
IF ANY OF THE FOLLOWING PHENOMENA OCCUR DESPITE THE ABOVE TROUBLESHOOT-
ING TECHNIQUES, PLEASE TURN OFF THE UNIT AND DISCONNECT THE POWER CORD
IMMEDIATELY AND CONTACT TECHNICAL SUPPORT OR A QUALIFIED TECHNICIAN:
• The fuse blows or circuit breaker
trips frequently.
• The power cable is abnormally hot.
UNIT ERROR CODES
When the air conditioner status is abnormal, the indicator display on the indoor unit will dis-
play an appropriate error code. Refer to the below table for specific and immediate action.
E5: OVER-CURRENT PROTECTION
Unplug and restart your unit to clear the error. If the error persists, contact a qualified
service technician.
E6: Unplug and restart your unit to clear the error. If the error persists, contact a qualified
service technician.
F1: Unit failure. Contact a qualified service technician.
F2: Unit failure. Contact a qualified service technician.
H1: Defrosting status; a natural phenomenon. The error will automatically clear after suf-
ficiently defrosting the cooling coils.
H6: Unplug and restart your unit to clear the error. If the error persists, contact a qualified
service technician.
OTHER ERROR CODES: Contact a qualified service technician.
TECHNICAL SUPPORT
For additional assistance, please visit our website or contact technical support.
Web: www.impecca.com
Phone: +1 866–954–4440
Email: support@impecca.com
• The insulation of the power cable is
ripped, shred or torn.
• The unit controls do not work.
• The unit produces abnormal noises.
–15–
Publicidad
Tabla de contenido
