Página 1
INSTALLATION INSTRUCTIONS FOR PART 99-7364B APPLICATIONS Table of Contents Hyundai Tucson 2014-up (with 4.3” screen) 99-7364B Dash Disassembly – Hyundai Tucson (with 4.3” screen) 2014-up ..2 Kit Assembly – ISO DIN radio provision with pocket ...... 3 KIT FEATURES • ISO DIN radio provision with pocket • Painted matte black KIT COMPONENTS TOOLS REQUIRED • A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws...
99-7364B Dash Disassembly 1. Unclip and remove trim panel above the radio. (Figure A) 2. Unclip and remove the hazard switch panel. (Figure B) 3. Remove (4) Phillips screws securing the radio. (Figure C) Continue to kit assembly (Figure A) (Figure B) (Figure C)
99-7364B Kit Assembly ISO DIN radio provision with pocket 1. Mount the pocket to the radio brackets using the supplied (4) screws. (Figure A) 2. Mount the radio to the bracket/ pocket assembly with the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 4. Mount the radio/bracket assembly into the dash. 5. Clip the radio trim plate over (Figure A) (Figure B) the radio/pocket assembly and reassemble dash in reverse order of disassembly.
Página 4
INSTALLATION INSTRUCTIONS FOR PART 99-7364B NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7364B AplicAciones Indice Hyundai Tucson 2014 y mas (con pantalla de 4.3”) 99-7364B Desmontaje del tablero – Hyundai Tucson (con pantalla de 4.3”) 2014 y mas ..2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 cArActerísticAs del kit...
99-7364B Desmontaje del tablero 1. Desenganche y quite el panel de la moldura que está arriba del radio. (Figura A) 2. Desenganche y quite el panel del interruptor de las luces intermitentes. (Figura B) 3. Quite los (4) tornillos Phillips que sujetan el radio.
(Figura B) 3. Localice el arnés de cables de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y...
Página 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7364B EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.