Kit Assembly - Metra 99-7364B Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Mount the pocket to the radio
brackets using the supplied (4)
screws. (Figure A)
2. Mount the radio to the bracket/
pocket assembly with the screws
supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Mount the radio/bracket assembly
into the dash.
5. Clip the radio trim plate over
the radio/pocket assembly and
reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
99-7364B
(Figure B)
3