Konrow K-TAB 1003 Guía De Usuario página 13

To charge the battery, use only the AC adapter that came with your device. Do not use any other
power supply or electrical device.
The electrical outlet to which the appliance is connected must be installed near the equipment and must
always be easily accessible.
Always wait at least 5 seconds after turning off the device before restarting it. Switching the device off and
back on immediately may damage the electrical circuits.
Do not disassemble the battery. Do not throw the battery into fire or water. Do not charge the battery if the
ambient temperature exceeds 45 ° C.
For repair or replacement of the battery, contact a qualified technician.
The life of the battery depends largely on how you use it. Do not expose the battery to temperatures below
0 ° C or above 50 ° C. Its operation could be altered.
Significant electromagnetic interference or electrostatic discharge can cause malfunction or loss of data. If
the unit does not work properly, reset the tablet or unplug the AC adapter from the electrical outlet, and
then reconnect it.
4. to turn on/ turn off your tablet
To turn on the tablet, press and hold the On / Off button on the edge of the tablet for 3 seconds.
If the tablet is on, briefly press the button to put it in standby mode. Press again, to exit the standby
mode.
To turn off the tablet, press the On / Off button for 3 seconds while a menu appears, then click the
Power Off button and confirm.
5. Locking / unlocking of SIM cards
Your K-TAB1003 is a tablet with a single SIM card. When you start your phone, it will prompt you to
enter the PIN code of your SIM card.
The emergency call feature allows you to call an emergency number
without having to enter the PIN code.
6. Locking / unlocking of the tablet
To unlock the screen:
• Press the power key on your tablet.
• Touch the unlock icon and drag up to unlock the device.
You can set the screen lock by adding a password, pattern to reproduce
when unlocking your tablet.
WARNING: Forgetting or losing the password, PIN code or drawing used
to lock the screen permanently blocks your tablet.
In case of forgetting or loss, the product warranty will not take effect for
one for a user error. Indeed, even a reset can not solve this problem. As a
precaution, write down your password or drawing.
13