Accessories And Spare Parts - Kärcher 4.812-236.0 Manual De Instrucciones

Changing parameters
 Push the Menu/Ok button, to go to the
main menu.
Main menu
 Position the cursor on the menu item
PARAMETERS of the main menu (PA-
RAMETERS is flashing) and confirm
with Menu/Ok. The PLC control goes
into the STOP mode. The window is
opened on the first parameter.
Example 1:
Window PARAMETERS B020
 Select desired function: Scroll through
the numbers of the function blocks us-
ing the navigation keys (▲/▼) until the
desired number is shown.
 Select the parameter to be changed us-
ing the navigation keys (◄/►).
 Change parameter using the navigation
keys (▲/▼) +/-.
 Confirm changes with Menu/Ok. Confir-
mation window is displayed.
 Confirm again 2x with Menu/Ok to save
the changes. The display goes back
into the RUN mode in the main menu.
10
Example 2:
Window PARAMETERS B049
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.

Accessories and Spare Parts

Only use accessories and spare parts
–
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
For additional information about spare
–
parts, please go to the Service section
at www.kaercher.com.
– 4
EN
Warranty