Wonder workshop Guia Del Usuario página 71

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Read all safety information and operating
instructions before using your robot to
avoid personal injury or damage to property.
WARNING:
To reduce the risk of personal injury or
property damage, do not attempt to remove
your robot's shell. No user-serviceable parts are
contained inside. The lithium battery cannot
be replaced.
Flashing Light warning - Seizures,
Blackouts and Eyestrain
Some people may be susceptible to blackouts or
seizures (even if they have never had one before)
when exposed to flashing lights or light patterns
(e.g., playing games or watching video). If you
have experienced seizures or blackouts or have
a family history of such occurrences, consult a
physician before playing with your robots. Discon-
tinue use of your robots and consult a physician
if you experience headaches, blackouts, seizures,
convulsions, eye or muscle twitching, loss of
awareness, involuntary movement, or disorien-
tation. To reduce risk of headaches, blackouts,
seizures, and eyestrain, avoid prolonged use.
Battery Warning
Your robot contains a lithium battery which is ex-
tremely hazardous and can cause serious injuries
to persons or property if removed or improperly
used or charged. Lithium batteries can be lethal if
ingested or can cause life-altering injuries. If you
suspect a battery has been ingested, see a physi-
cian immediately. In the event of battery leakage,
avoid contact with skin and eyes. In case of con-
tact with the eyes, rinse copiously with cold water
and consult a physician. If your robot is charging
and you notice a suspicious smell or noise or
observe smoke around the robot, disconnect it
immediately and turn off all sources of heat or
flame. Gas could be given off which could cause a
fire or explosion. You are solely liable for ensuring
that the lithium battery is used correctly (charging,
discharging, storage, etc.). The manufacturer
and distributor shall have no liability for injury or
damage to persons or property associated with
lithium battery use.
General Safety and Storage Warnings
• Operating temperature – 0 to 30° C (32 to 90° F).
Exceeding operating temperature may increase
fire risk.
• Do not use your robot if it has been broken
and the battery is exposed or compromised in
any way.
• Never touch or contact any liquid from the
battery or cross wires from the battery to avoid
burns, shocks or fire.
• Do not attempt to dismantle, pierce, distort, or
repair your robot. Doing so may expose batteries
or wiring.
• Do not place any heavy objects on your robot.
Doing so may cause it to break and expose
batteries or wiring.
• Do not attempt to clean your robot with solvent,
denatured alcohol, or flammable liquids. Doing
so may damage your robot, make your robot
inoperable, or cause a fire.
• Do not immerse your robot in water. Doing so
may cause your robot to become inoperable.
All manuals and user guides at all-guides.com
Charging
Use the supplied USB cable to charge your robots
under adult supervision. Power source should
be regularly examined for damage to the cord,
plug, enclosure and other parts, and in the event
of such damage, they must not be used until the
damage has been repaired.
• Do not charge near flammable materials or a
flammable surface (wooden flooring, carpet,
etc.) or conducting surfaces.
• Do not leave your robot unattended while
charging.
• Disconnect the USB cable when the robot is
finished charging.
• Never charge the device while it is hot.
• Do not cover your robot while it is charging.
• Recharge the battery at a temperature between
0 and 30 degrees C (32 to 90 degrees F).
Copyrights, Registered Trademarks, and Licenses
Copyright © 2017 Wonder Workshop™, Inc.
All Rights Reserved. Patents Pending. The total
or partial reproduction or transmission of this
guide in any form or by any process whatsoever
is strictly prohibited without prior consent from
Wonder Workshop™, Inc. Wonder Workshop™,
the Wonder Workshop™ logo, the Wonder logo
and Cue™ are trademarks of Wonder Workshop™,
Inc. All other trademarks mentioned in this guide
are the property of their respective owners.
Certain portions of the firmware included or
downloaded into the Products contains objects
and/or executables derived from copyrighted
sources and licensed under the terms available at
www.makewonder.com/opensource.
Wonder Workshop, Inc. grants you a nonexclusive,
nontransferable license to use its proprietary firm-
ware included in the Products (the "Firmware"),
in executable form, solely as embedded in the
Products, and solely for your non-commercial
use. You may not copy or modify the Firmware.
You acknowledge that the Firmware contains
trade secrets of Wonder Workshop, Inc., and, in
order to protect such trade secrets, you agree not
to disassemble, decompile or reverse engineer the
Firmware nor permit any third party to do so, ex-
cept to the extent such restrictions are prohibited
by law. Wonder Workshop, Inc. reserves all rights
and licenses in and to the Firmware not expressly
granted to you hereunder.
Do not put your robot in a microwave oven or
pressurized container. Doing so may cause a fire
or cause the batteries to explode.
Attributions
Apple™ and the Apple logo are trademarks of Ap-
ple Inc. registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
Android™ and Google Play™ are trademarks of
Google Inc.
The Bluetooth® wordmark and logos are
registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by Wonder
Workshop, Inc. is under license.
Recycling and WEEE
Dispose of your robots in accordance with local
and national disposal regulations (if any), including
those governing the recovery and recycling of
waste electrical and electronic equipment, such
as WEEE in the European Union. For information
about recycling waste equipment, please contact
your local city waste disposal service.
California Proposition 65 Warning
THIS PRODUCT CONTAINS CHEMICALS KNOWN
TO THE STATE OF CALIFORNIA TO CAUSE
CANCER AND BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM.
FCC Statement
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Warning:
Changes or modifications to this unit not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Canadian DoC Notice
This device complies with Industry Canada
License-exempt RSS-210. Operation is subject to
the following two conditions: (1) this device may
not cause interference, and (2) this device must
accept any interference, including interference
that may cause undesired operation of the device.
Warranty
Wonder Workshop™, Inc.: Limited
Physical Product Warranty & 30-Day
Return Policy
Wonder Workshop™, Inc. offers the following
coverage for your robots and accessories (the
"Product"). For Thirty (30) days after date of order
shipment by Wonder Workshop™, Inc., we will re-
fund the purchase price or exchange the Product.
For One (1) year after purchasing the Product, you
will be covered by our Limited Warranty.
For consumer purchases made outside the U.S.,
you may have different or additional rights.
Retail Return Policy:
Physical Product purchased from an authorized
Wonder Workshop, Inc. retailer:
Contact the retailer you purchased the Products
from for their return policy.
30 Day Return Policy:
Physical Product purchased from Wonder Work-
shop, Inc. at makewonder.com
If you are not satisfied with your Product within
30 days from date of order shipment, you may
return it after obtaining a Wonder Workshop,
Inc. return material authorization ("RMA"). The
RMA may be obtained by going to our website
customer support section (help.makewonder.
com) or contacting support@makewonder.com.
The Product must be received by us within 10 days
after issuance of the RMA. It is your responsibility
to prepay all shipping charges; you assume all risk
of loss or damage to the Product while in transit.
Note: We recommend a method that allows you
to track your return shipment.
If the Product is returned unused, in new con-
dition, and in the original packaging, including
any accessories, manuals, documentation, and
registration that shipped with the Product, we will
exchange it or refund 100% of the purchase price.
If the Product was opened, used and repackaged
for a return, during the 30 day period following
date of shipment by Wonder Workshop, Inc., then
you are responsible for paying the cost to ship
it back to Wonder Workshop, Inc. There is no
restocking fee. Product must be suitably protected
during shipment using cushioned packaging,
bubble wrap or similar protective measures. If
you return Product to us (a) without a Wonder
Workshop, Inc. RMA, (b) beyond the 30 day return
period, or (c) without proper protective packaging,
we retain the right to refuse the refund. Please
allow a minimum of 2 weeks for us to credit the
account used to make the original purchase.
Shipping and handling charges, gift wrap fees, and
taxes and duties (e.g., state, customs, VAT) are not
part of the original purchase price and are not re-
fundable. The RMA number must be included with
the returned Product to process your refund.
1 Year Limited Warranty:
Physical Product
Wonder Workshop, Inc. warrants the Product
against defects in materials and workmanship
under normal use for a period of 1 year from the
date of purchase ("Warranty Period"). If a Product
defect arises and a valid claim is received by us
within the Warranty Period, Wonder Workshop,
Inc., at our discretion, will either (1) repair the
Product at no additional charge, (2) exchange
the Product for new Product if the Product is still
being manufactured, or substitute an alternative
Product of equal or greater value, or (3) exchange
the Product for a refurbished Product as long as
the replacement meets the original Product spec-
ification. A replacement Product or part assumes
the remaining warranty of the original Product or
90 days from the date of replacement or repair,
whichever is longer. For consumer purchases
made outside the U.S., you may have different or
additional rights.
This limited warranty does not cover loss or
damage resulting from (1) accident, abuse,
misapplication, or any unauthorized repair, mod-
ification or disassembly; (2) improper operation
or maintenance, usage not in accordance with
Product instructions or connection to improper
voltage supply; (3) lost parts originally supplied
with the Product; (4) normal wear and tear; or (5)
any software defects or failures.
This limited warranty does not, under any
circumstances, cover the replacement of or reim-
bursement for any product that is not a Wonder
Workshop, Inc. product.
Except where prohibited by applicable law, this
limited warranty is non-transferable and is limited
to the original purchaser and the country in which
the Product was purchased.
This remedy is your sole and exclusive remedy
and is in lieu of all other express warranties. Any
implied warranties on the Product prescribed by
statute, including, but not limited to an implied
warranty of merchantability or fitness for a partic-
ular purpose, are expressly limited to the one-year
period described above. For consumer purchases
made outside the U.S., you may have different or
additional rights. Wonder Workshop, Inc. reserves
the right to modify this warranty prospectively at
any time in its sole discretion.
LIMITATION ON DAMAGES: IN NO EVENT WILL
WONDER WORKSHOP, INC. BE LIABLE FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES BASED UPON BREACH OF WARRANTY,
BREACH OF CONTRACT, NEGLIGENCE, STRICT
LIABILITY OR ANY OTHER LEGAL THEORY. SUCH
DAMAGES INCLUDE, BUT ARE NOT LIMITED
TO, LOSS OF PROFITS, LOSS OF SAVINGS OR
REVENUE, LOSS OF USE OF THE PRODUCT OR
ANY ASSOCIATED EQUIPMENT, HARDWARE
OR SOFTWARE, COST OF ANY SUBSTITUTE
EQUIPMENT, CLAIMS OF THIRD PARTIES, INJURY
TO PROPERTY, AND/OR LOSS OF GOODWILL.
SOME STATES/COUNTRIES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATIONS AND/OR EXCLU-
SIONS OR LIMITATION OF LIABILITY MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPE-
CIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER
RIGHTS WHICH VARY FROM JURISDICTION TO
JURISDICTION.
Instructions to Obtain Warranty Service:
Contact support@makewonder.com to determine
if your Product is eligible for warranty replace-
ment. If you qualify, you must return the Product
with the provided shipping label in either its orig-
inal packaging or packaging providing an equal
degree of protection, to the address specified by
us. In accordance with applicable law, we may
require that you furnish proof of purchase details
and/or comply with registration requirements
before receiving warranty service. It is your re-
sponsibility to backup any data, software, or other
materials you may have stored or preserved on
the Product. It is likely that such data, software, or
other materials will be lost or reformatted during
service, and we will not be responsible for any
such damage or loss. For specific instructions on
how to obtain warranty service on your Product,
visit our website at help.makewonder.com

Publicidad

Tabla de contenido
loading

Tabla de contenido