Whittier Wood Products 441W Instrucciones Para Armar página 4

F
K
FIG. 5
4) TO ATTACH SHELF:
(For 441W measure 1½" from the bottom of each leg.)
(For 442W and 445W measure 4" from bottom of each leg.)
Mark the location for a #6 x 1/2" Undercut Type 17 Screw (F). The mark should be made on the same
leg surface that touches the short apron, slightly off center towards inner edge of leg. With the hole
in the 4 Hole 90° Bracket (K) over the mark insert a #6 x 1/2" Undercut Type 17 Screw (F) and fasten
securely. See FIGURE 5. Do this for all four legs. Now hold the shelf against the 90° brackets and
fasten the shelf to the brackets with #6 x 1/2" Undercut Type 17 Screws (F). See FIGURE 6.
Page 4 – 441W, 442W & 445W
FIG. 6
F D